wxy 发表于 2017-8-23 15:23:07

关于多个文件名匹配后批量输出

本帖最后由 wxy 于 2017-8-23 18:43 编辑

我想把读入的文件根据year（i），month（i），day（I）三列分别输出到对应的TXT文件中，输出文件名也是根据这三列命名的，但是匹配输出时是每隔一个文件输出一次（像1，3，5），（本来应该是每日数据分别输出到对应日文件下），不知道是哪里出错
Integer Function daysinyear(year, month)
Integer :: year, month
Integer :: daysinmonth(12) = [ 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 ]
If (((mod(year,4)==0) .And. (mod(year,100)/=0)) .Or. (mod(year,400)==0)) Then
    daysinmonth(2) = 29
Else
    daysinmonth(2) = 28
End If
daysinyear = daysinmonth(month)
End Function daysinyear

Program weather
Implicit None
Integer l, i, j, m, daysinyear, k, a
Integer, Allocatable :: site(:), lat(:), lon(:), year(:), month(:), day(:)
real, Allocatable :: rain(:)
Integer :: h, pre1, pre2
Character (45) :: filename = 'SURF_CLI_CHN_MUL_DAY-PRE-13011-123456.txt'
Character (8) :: outfile = '12345678', f = '12345678'
!character(6)::filename1='123456.txt'
Character (Len=20) :: line
!================================================================================================
!批量读入文件
!================================================================================================
Do l = 2010, 2015 !内部文件读写，将filename 第8-11 字符换为相应年份
    Do j = 1, 12
      Write (filename(32:37), '(i6)') l*100 + j
      Open (11, File='D:\气象数据\降水\'//filename, Action='read')
!=================================================================================================
!创建输出文件
!=================================================================================================
      Do k = 1, daysinyear(l, j)
      Write (outfile(1:8), '(i8)') l*10000 + j*100 + k
!print *,outfile
      Open (15, File='D:\气象数据\pre\'//outfile//'.txt')

!===============================================================================================
! 获取文件行数
!===============================================================================================
      a = 0
      Do
          Read (11, *, End=100) line
          a = a + 1
      End Do
      100 m = a !//跳过第一行
      Rewind (11)

!=================================================================================================
      Allocate (site(m), lat(m), lon(m), year(m), month(m), day(m), rain(m))
!=================================================================================================
      Do i = 1, m
          Read (11, *) site(i), lat(i), lon(i), h, year(i), month(i), day(i), pre1, pre2, rain(i)
          rain(i)=rain(i)/10


          Write (f(1:8), '(i8)') year(i)*10000 + month(i)*100 + day(i)

!print *,f
          If (rain(i)==3270) Then
            rain(i) = 0
          End If
!print *, site(i),lat(i),lon(i) , year(i) , month(i) , day(i) , rain(i)

       ! print *,site(i), lat(i), lon(i), year(i), month(i), day(i),rain(i)


!=================================================================================================



!==================================================================================

      End Do
      Do i = 1, m
      if(l*10000 + j*100 + k.eq.year(i)*10000 + month(i)*100 + day(i))then
      Write (15, "(i5,2x,i4,2x,i5,2x,i4,2x,i2,2x,i2,2x,f5.2)") site(i), lat(i), lon(i), year(i), month(i), day(i), rain(i)
      print *,site(i), lat(i), lon(i), year(i), month(i), day(i),rain(i)
      end if
      end do
      Deallocate (site, lat, lon, year, month, day, rain)
      End Do
    End Do

End Do


Close (11)

End Program weather

chiangtp 发表于 2017-8-23 21:24:00

請參考看看:
Program weather
Implicit None

Integer l, i, j, m, daysinyear, k
Integer, Allocatable :: site(:), lat(:), lon(:), year(:), month(:), day(:)
real, Allocatable :: rain(:)
Integer :: h, pre1, pre2, ier
Character (45) :: filename = 'SURF_CLI_CHN_MUL_DAY-PRE-13011-123456.txt'
Character (8) :: outfile = '12345678'
Character (Len=20) :: line

!=====================================

DO l = 2010, 2015
DO j = 1, 12
    WRITE(filename(32:37),'(i6)') l*100+j
    OPEN( UNIT=11, FILE='D:\气象?据\降水\'//filename, ACTION='READ' )

    m = 0
    DO
      READ(11,*,IOSTAT=ier) line
      IF( ier == -1 ) EXIT ! end-of-file
      m = m + 1
    END DO
    ALLOCATE (site(m), lat(m), lon(m), year(m), month(m), day(m), rain(m))

    REWIND(11)
    DO i = 1, m
      READ(11,*) site(i), lat(i), lon(i), h, year(i), month(i), day(i), pre1, pre2, rain(i)
      rain(i) = rain(i)/10.0
      IF( rain(i) == 3270.0 ) rain(i) = 0.0
    END DO
    CLOSE( UNIT=11 )

    DO k = 1, daysinyear(l, j)
      WRITE(outfile(1:8),'(i8)') l*10000 + j*100 + k
      OPEN( UNIT=15, FILE='D:\气象?据\pre\'//outfile//'.txt' )
      DO i = 1, m
      IF( l==year(i) .AND. j==month(i) .AND. k==day(i) ) THEN
          Write (15, "(i5,2x,i4,2x,i5,2x,i4,2x,i2,2x,i2,2x,f5.2)") site(i), lat(i), lon(i), year(i), month(i), day(i), rain(i)
          WRITE(*,*) site(i), lat(i), lon(i), year(i), month(i), day(i), rain(i)
      END IF
      END DO
      CLOSE( UNIT=15 )
    END DO

    DEALLOCATE( site, lat, lon, year, month, day, rain )
END DO
END DO

End Program weather

!=======================================

Integer Function daysinyear(year, month)
Integer, INTENT(IN) :: year, month

Integer :: daysinmonth(12) = [ 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 ]

If (((mod(year,4)==0) .And. (mod(year,100)/=0)) .Or. (mod(year,400)==0)) Then
    daysinmonth(2) = 29
Else
    daysinmonth(2) = 28
End If

daysinyear = daysinmonth(month)
End Function daysinyear

wxy 发表于 2017-8-24 15:06:19

chiangtp 发表于 2017-8-23 21:24
請參考看看:
Program weather
Implicit None


嗯嗯 谢谢 还想请教一下，这里如果我想做个缺省值判断，怎样在读取时跳过有缺省值的这一行呢，我这样写编译能通过，但打印不出结果来。Do i = 1, a
             If (rain(i)==32700 .or.rain(i)==32766) Then
                !   rain(i) = -999
                read(*,*)
                Read (11, *) site(i), lat(i), lon(i), h, year(i), month(i), day(i), pre1, pre2, rain(i)
                print*, year(i), month(i), day(i),rain(i)
      
          End If

chiangtp 发表于 2017-8-24 17:08:47

wxy 发表于 2017-8-24 15:06
嗯嗯 谢谢 还想请教一下，这里如果我想做个缺省值判断，怎样在读取时跳过有缺省值的这一行呢，我这样写编 ...

請參考:
INTEGER :: mm

DO l = 2010, 2015
DO j = 1, 12
    WRITE(filename(32:37),'(i6)') l*100+j
    OPEN( UNIT=11, FILE='D:\气象数据\降水\'//filename, ACTION='READ' )

    m = 0
    DO
      READ(11,*,IOSTAT=ier) line
      IF( ier == -1 ) EXIT ! end-of-file
      m = m + 1
    END DO
    ALLOCATE (site(m), lat(m), lon(m), year(m), month(m), day(m), rain(m))

    REWIND( UNIT=11 )
    mm = 0
    DO i = 1, m
      mm = mm + 1
      READ(11,*) site(mm), lat(mm), lon(mm), h, year(mm), month(mm), day(mm), pre1, pre2, rain(mm)
      IF( rain(mm)==32700.0 .OR. rain(mm)==32766.0 ) mm = mm-1
    END DO
    CLOSE( UNIT=11 )

    DO k = 1, daysinyear(l, j)
      WRITE(outfile(1:8),'(i8)') l*10000 + j*100 + k
      OPEN( UNIT=15, FILE='D:\气象数据\pre\'//outfile//'.txt' )
      DO i = 1, mm
      IF( l==year(i) .AND. j==month(i) .AND. k==day(i) ) THEN
          WRITE(15, "(i5,2x,i4,2x,i5,2x,i4,2x,i2,2x,i2,2x,f5.2)") site(i), lat(i), lon(i), year(i), month(i), day(i), rain(i)
          WRITE(*,*) site(i), lat(i), lon(i), year(i), month(i), day(i), rain(i)
      END IF
      END DO
      CLOSE( UNIT=15 )
    END DO

    DEALLOCATE( site, lat, lon, year, month, day, rain )
END DO
END DO

1. 我不確定這是不是你的用意
2. "數(numeric)"的運算, 請維持"型態(type)"的一致性: rain(i)==32700.0

wxy 发表于 2017-8-25 12:11:00

明白了 ，谢谢
页: [1]
查看完整版本: 关于多个文件名匹配后批量输出